Horiba Scientific LAQUA-PD210 Скачать руководство пользователя страница 8

Страница: 8 / 88

For Your Safety

• For Your Safety

• Hazard classification and warning symbols

Warning messages are described in the following manner. Read the messages and follow the

instructions carefully.

• Hazard classification

• Warning symbols

This indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This is to be
limited to the most extreme situations.

This indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices.

Description of what should be done, or what should be

followed.

Description of what should never be done, or what is

prohibited.

Содержание LAQUA-PD210

























































































Результаты поиска

Содержание LAQUA-PD210

Отзывы:

Похожие инструкции для LAQUA-PD210

Бренды по названию

Популярные бренды

Horiba Scientific LAQUA-PD210, Инструкция по эксплуатации

Результаты поиска

Содержание LAQUA-PD210

Отзывы:

Похожие инструкции для LAQUA-PD210

Бренды по названию

Популярные бренды