SSH
AND
T
ELNET
B
ASIC
C
ONFIGURATION
4985LAN Large Matrix Display 4985 - V08.00
71 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
6
SSH and Telnet Basic Configuration
Only basic configuration is possible via SSH or Telnet. The complete
configuration of the Module 8029NTC takes exclusively place via the
WebGUI.
It is just as easy to use SSH (Port 22) or Telnet (Port 23) as the WebGUI. Both protocols use
the same user interface and menu structure.
The user names and passwords are the same as on the WebGUI and are kept in alignment
(see
Chapter 5.3.6.10 Passwords Master / Device
SSH does not allow blank passwords for safety reasons.
The corresponding protocols should be enabled for the use of Telnet or
SSH (see
Chapter 5.3.3.5 Management (Management-Protocols
HTTP, SNMP, SNMP-Traps, etc.))
).
The navigation through the menu takes place by entering the respective number associated
with the menu option (as can be seen in the above image).