M
ODULE
B
EHAVIOUR
N
ETWORK
T
IME
C
LIENT
8029NTC
4985LAN Large Matrix Display 4985 - V08.00
21 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
4.4 Firmware Update
The Network Time Client 8029NTC is a multi-processor system. For this reason a firmware
update always consists of a so called Software SET including two (2) program releases
defined by the SET version needed to be loaded into the board.
Module 8029NTC:
1x Image Update
upgrade_8029NTC_vXXXX.img
1x H8 Update
8029NTC_128.mot
An update is a critical process.
The device must not be turned off during the update and the network
connection to the device not be interrupted.
All programs of a SET need to be uploaded to ensure a defined operation
condition.
The program releases assigned to a SET version may be taken from the
release notes of the software SETs of the Time Client 8029NTC.
The general process of a software update of Module 8029NTC is described below:
For selection of the correct update set the identifier
8029NTC
has to be
observed obligatory.
8029NTC can be recognized:
•
By the label on the housing cover "
8029NTC
"
•
In WebGUI at the Web-banner "
8029NTC
"
The firmware update 8029NTC has to be performed as a SET.
The software package contained in the file package hopf8029NTC_SET_vXXXX.zip has to be
unpacked. The following steps have to be executed in the following sequence:
1. Image Update 8029NTC
2. H8 Firmware Update 8029NTC