
HTTP
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
4985LAN Large Matrix Display 4985 - V08.00
24 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
5
HTTP WebGUI – Web Browser Configuration Interface
For the correct display and function of the WebGUI, JavaScript and Cookies
must be enabled in the browser.
5.1 Quick Configuration
This chapter gives a brief description of the basic operation of the WebGUI installed on the
module.
5.1.1 Requirements
•
Ready-for-operation
hopf
Large Scale Display 4985LAN
•
PC with installed web browser (e.g. Internet Explorer) in the sub-network of Large
Scale Display 4985LAN
5.1.2 Configuration Steps
•
Create the connection to the Large Scale Display with a web browser
•
Login as a
'master'
user (default password <
master
> is set by delivery)
•
Switch to "Network" tab if available and enter the DNS Server (required for NTP and
the alarm messages depending of network)
•
Save the configuration
•
Switch to "Device" tab and restart Large Scale Display via "Reboot Device"
•
NTP Service is now available with the standard settings
•
NTP specified settings can be done in the "NTP" tab (e.g. entry of the NTP Time
Server used for synchronization).
•
Alarm messages via Syslog/SNMP/Email can be configured in "Alarm" tab
– only if
this function is enabled by an activation key
The following detailed explanatory information should be read if anything is
unclear while executing the configuration steps.