HTTP
W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
4985LAN Large Matrix Display 4985 - V08.00
40 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
5.3.3.4 Routing File
In order to activate this function,
Use Route File
must be set to
enabled
on the Routing Page
(see
Chapter 5.3.3.3
Routing (Activation Key necessary)
The routing file also makes it possible to configure IPv6 routes.
Via the selection window under
Update file
and the button
Upload now
a new routing file can
be uploaded. While uploading the file is checked whether it is error-free; only then it is used.
If a routing file has already been uploaded, the uploaded routing file can be downloaded under
Download Routing File
.
Routing File Syntax
Each line of the routing file must be either a valid routing line or a comment line.
A comment line starts with a hash sign (#) and can contain any text behind it.
A routing line has the format [destination address] [tab] [length of the destination mask in bits]
[tab] [gateway address for the specified destination].
Should the host 192.168.20.11 be reached by using the gateway 192.168.0.2, then the routing
file must look like this:
192.
168
.20.11
32 192.168.0.2
Example of a Routing File:
# Host 192.168.20.11 via Gateway 192.168.0.2
192.168.20.11
32 192.168.0.2
#Net 192.168.180.0 Netmask 255.255.255.0 via Gateway 192.168.0.2
192.168.180.0
24 192.168.0.2
#Net 2001:0db8:0:f102:: Subnet Prefix Length 64 via Gateway 2001:0db8:0:f101::1
2001:0db8:0:f102:: 64
2000::1
Current System Routing Table
This table shows all active IPv4 and IPv6 routes.
For IPv6 routes, the colons of the destination and gateway addresses are not displayed, and
the
Network Mask
column displays the length in hexadecimal.