hopf 4985LAN, Техническое руководство, Страница: 64 / 84

HTTP W
EB
GUI
–
W
EB
B
ROWSER
C
ONFIGURATION
I
NTERFACE
4985LAN Large Matrix Display 4985 - V08.00 64 / 84
hopf
Elektronik GmbH
Nottebohmstr. 41
• D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: info@hopf.com
5.3.6.3 Restoring Factory-Settings (Factory Defaults)
In some cases it might be wished to restore all settings of the Module 8029NTC to their factory-
settings (factory defaults).
This function enables the restoring of all settings from the flash memory to their factory default
values. This also affects passwords (see
Chapter 8 Factory Defaults ).
The registration is conducted as Master user according to the manual, Chapter 5.2.1 LOGIN
and LOGOUT as User .
By pressing " Reset now " factory default values are set.
There is NO chance to restore the deleted configuration once this process is triggered.
After a Factory Default a complete verification and a possibly new confi-
guration of the Module 8029NTC are required. Especially the default
MASTER and DEVICE passwords should be reset.
5.3.6.4 Reboot Device
All settings not saved with " Save " are lost on reset (see Chapter 5.2.3 Enter or Changing
Data ).
In broad terms, the NTP service implemented on the Board is restarted. This leads to a
renewed alignment phase with the loss of the stability and accuracy reached up to this point.
Please log in as a "Master" user in accordance with the description in Chapter 5.2.1 LOGIN
and LOGOUT as User .
Press the " Reset now " button and wait until the restart has been completed.
This procedure can take up to one minute. The website is not automatically updated.