Honeywell VRX180, Руководство пользователя

Страница: 171 / 294

Programming Function Blocks and Features
Video Recorder – User Manual 157
Assign Displays to Keys
Your instrument has 4 display keys. You can assign a total of 10 displays to these keys. Pressing the
Display 1 key (
1
) accesses the format you assign to Display 1. Display 2 key (
2
) accesses Display
2 and Display 3 key (
3
) accesses Display 3. The Display key ( ) accesses displays 4-10.
Table 4-64 describes the prompts for assigning displays to keys.
Table 4-64 Assign Displays To Keys Prompts
Prompt Range/Selections Definition
BLANKING TIME OFF, 1 HOUR, 30 MIN, 15
MIN, 5 MIN, 1MIN This is a screen-saver type function. If enabled, the screen
will blank after time selected. Screen will unblank if a key is
pressed or an alarm/diagnostic occurs.
DISPLAY KEY 0, 1, OFF, PARM
By selecting PARM, you can connect a discrete input
parameter which will function as the Display key. Each off-
to-on transition of this discrete will behave as if the Display
key were pressed.
Select 0, 1, or OFF to disable this function.
BACKGROUND
COLOR
WHITE, BLACK This sets the background color of displays to black or white.
Affects all Trend (live and replay), Bar Graph, and Panel
displays. Does not affect Loop, Unit Data, Summary, or
menus.
SELECT PEN
COLOR
PEN #1
PEN #2
.
.
.
PEN #12
Assign a color to each of up to 12 points. Affects points
displayed on all Trend (live and replay), Bar Graph, Loop,
and Panel displays. Pen #1 corresponds to Point #1, Pen #2
corresponds to Point #2, etc.
Choices: Green, Cyan, Yellow, Purple, Blue, Brown, Red,
Black, White.
Attention: A Yellow pen appears yellow on a black
background and orange on a white background.
Caution: Do not select a white pen color for a white
background or a black pen color on a black background;
these will render your points invisible.
(continued)