Honeywell TUXWIFIS Скачать руководство пользователя страница 56

Страница: 56 / 64

Notes and Compatible Devices (cont’d)

Navigation Icons

To aid in the navigation through the Tuxedo touch-screens, a set of user-friendly icons has been
provided. The appearance and function are described below.

ICON

ICON TITLE

FUNCTION

“Product/Training

Videos”

Accesses the “Product Introduction and Training Videos.”

"Message"

Record and retrieve Voice Messages.

"Automation"

Accesses the Z-Wave setup, Scene setup, and Group/Room setup screens.

"Security"

Accesses the "Security" screen.

“Home”

Returns you to the "Home" screen.

“Back”

Reverts to the last screen viewed.

“Panic”

Displays Emergency functions (as programmed by the installer). See
programming the Control Panel note.

Note:

This icon is displayed and active

on all screens except while in the Clean Screen mode, during an LCD Display
test in

Diagnostics

, and from the Video and Camera screen.

“Control Panel
Message”

This icon alerts the user to a Control Panel Message.

“Setup”

Accesses the Setup menus.

“Multi-Media”

Accesses the Message, Camera, Picture and Video features.

“Video”

Allows user to play video files.

“Picture”

Allows user to display personal photos in a slide show format.

“Annunciate
Status”

Allows user to hear system status.

“Camera”

Press to access camera settings.

“Event View”

Press to access video recordings.

Содержание TUXWIFIS

































































Результаты поиска

Содержание TUXWIFIS

Отзывы:

Honeywell TUXWIFIS, Инструкция по установке и настройке, Страница: 56 / 64

Результаты поиска

Содержание TUXWIFIS

Отзывы: