2. The first [0] after [PARAMETER NUMBER] will be flashing. A flashing
digit serves as a "cursor" and marks the spot where any keyboard entry
will be placed. From this display, any parameter can be reached and
programmed. To choose the desired parameter, simply enter the two-
digit number identifying it. To go to
PARAMETER 03,
for example,
press
0
, then
3
.
Note that in any parameter screen, the current Date and Time will remain
active, and always appears at the right.
3. Advancing from one parameter to the next is easy. Once a particular
parameter has been programmed, advance to the next parameter by
using one of the following methods:
• Press the key to advance to the next sequential parameter.
• Press the key to advance to the previous parameter.
NOTE: When the arrow keys are used, only the
name
of the next parameter
is displayed, not its
number
.
• Press the
N
key at any time to reveal the
number
of the last (i.e.,
current) parameter to be programmed, from which it can be changed.
The display below results when the
N
key is pressed after
programming
PARAMETER 03.
PARAMETER NUMBER 03/01/00 HH:MM:SS
• Enter the two digits of the next parameter to be programmed; once
done, the parameter's name and the current value it has stored will be
displayed.
• Press the
key to move the flashing digit position one character to
the right; similarly, use the
key to move it one character to the left.
These keys are useful when it's easier to change just one character in
a series, rather than entering all its digits.
4. To change the value of any parameter, press the
NEXT
key successively
to move forward through the selections, or the
MANUAL/PREVIOUS
key to move backward through them until desired value has been
reached.
Page 2-6
Section 2: Programming the CP-220A CP-220A Central Station Receiver
Hook-Up and Installation Manual
