HOLZMANN MASCHINEN BS370TOP, Руководство пользователя

Страница: 37 / 57

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 37
BS370TOP
NOTICE: If cutting pipes with thin walls,
reduce the saw arm descent speed by
adjusting the feed control valve (18).
 In an emergency you can stop all machine
functions immediately by pressing the
EMERGENCY STOP switch (26 and 27).
16.3 Settings
16.3.1 Saw band tension
Correct saw band tension is essential for a long
life of the saw band and to ensure the quality of
the cut.
 For this purpose the saw band tension must
be adjusted with the hand wheel (1).
 The correct saw band tension is achieved
when the handwheel is turned until it touches
the microswitch. Only at this point can the
machine be put into operation.
NOTICE: the ideal saw band tension is between
12 and 14 MPa.
 The current belt tension is displayed on the
blade tension gauge (2).
NOTICE: The position of this microswitch is
factory set. For this reason, when replacing the
saw band, it is necessary to use only saw bands
that comply with the technical data (see 4.3).
16.3.1 Saw band guide
The saw band guide should be close to the
workpiece. This helps to ensure a clean cut.
The following steps are necessary:
 Loosen the screw (3) with an allen key.
 Push the saw band guide with the handle (4) into
the desired position.
 Retighten the screw (3) with the allen key.