HOLZMANN MASCHINEN BS370TOP, Руководство пользователя

Страница: 36 / 57

OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 36
BS370TOP
 Clamp workpiece in the vice.
 Switch the START (15) button.
 Make sure that the saw band runs in the right
direction.
NOTICE: slightly press the saw arm down to
allow air bubbles to escape from the hydraulic
cylinder.
 Slowly open the feed control valve (8)
counter-clockwise until the saw arm descends
and allow the saw to cut at an appropriate
feed rate.
 When the cut is complete (lower position
reached), the machine switches off
automatically by the limit switch.
NOTICE: if the saw arm falls too fast, close
the ON/OFF valve (7) fully to stop its descent.
NOTICE: a saw arm that falls too fast can
cause the saw band to stop on the workpiece
and the machine to switch off automatically.
 In an emergency you can stop all machine
functions immediately by pressing the
EMERGENCY STOP switch (16 and 17).
16.2.3 Manual operation
 Close the feed control valve (18) to hold the
arm in position.
 Lift the saw arm to the maximum height to
release the spring.
 Lift the fixing knob (19).
 Now the lever (20) can be moved downwards
to the "manual" position.
 Return the fixing knob (19) to its original
position.
 Turn the selector switch of the operating
mode (21) clockwise to manual operation (see
16.2.1).
 Select the cutting speed (22).
 Turn the main switch (23) to the ON position.
 Control lamp (24) must light up.
 Clamp workpiece into the vice.
 Fully open the ON/OFF valve (17) by turning it
clockwise.
 Fully open the feed control valve (18) by
turning the valve clockwise.
 Hold the saw arm at the handgrip.
 Press the trigger switch (25) on the handgrip
to start the machine.
 Saw band is running at the selected speed.
 Check that the saw band runs in the right
direction.
 Slowly move the saw arm down and cut the
workpiece.