Holip HLP-C100 Series, Руководство по эксплуатации

Страница: 59 / 92

HLP-C100 Series Operating Manual
HLP-C100 Series
-
54
-
7.6 Parameter Group 05: Digital Input/Output
C05.10 Function Description Range Unit Default Setting
Terminal FOR Digital Input 0~36 8
C05.11 Function Description Range Unit Default Setting
Terminal REV Digital Input 0~36 10
C05.12 Function Description Range Unit Default Setting
Terminal DI1Digital Input 0~36 15
C05.13 Function Description Range Unit Default Setting
Terminal DI2Digital Input 0~36 16
C05.14 Function Description Range Unit Default Setting
Terminal DI3Digital Input 0~36 17
C05.1* Digital Input
Option: [0] No operation, the f requency converter will not to react to signals
transmitted to the terminal;
[1] Reset, reset the f requency converter af ter a Trip/Alarm;
[2] Coast Inverse, no output, leaving the motor coasting to stop;
[5] DC-brake Inverse, see C02.01, this f unction is only active when value
in C02.02 and C02.04 are different f rom 0.
[6] Stop Inverse, the drive is stopped according to selected ramp time;
[8] Start, 1=start, 0=stop;
[10] Reversing, change direction of motor shaf t rotation, reversing
signal only changes direction of rotation, it does not activate start
f unction, C04.10 must choose [2] Both directions;
[11] Start reversing, used for start/stop and for reversing at the same
time;
[14] Jog, used for activating jog speed, see C03.11;
[15] Preset ref. bit0, Preset ref.bit0
、
bit1
、
bit2
、
bit3 is used for the choice
of the preset reference, see parC03.10;
[16] Preset ref. bit1, same as[15];
[17] Preset ref. bit2, same as [15];
[28] Catch up, select catch up to increase the resulting reference value
by the percentage set in par. C03.12;
[29] Slow down, select slow down to reduce the resulting reference