Hog Technologies Stripe Hog SH8000, Руководство по эксплуатации, Страница: 12 / 192

12
Safety Information
Always be sure your work area is clear of people
whenever the ultra-high pressure pump is en-
gaged. When working on the waterblasting heads
with an operator in the cab of the truck you should
always make sure you can see his hands.
Use Only Products Intended for High
Pressure Waterblasting Use
Know the pressure ratings of all equipment be-
ing used and never exceed the service rating of
the weakest component. This system is designed
to work with pressures up to but not exceeding
40,000 psi (2758 bar). Ultra-High Pressure parts
should be purchased based on a minimum burst
rating of 1.5 times the maximum operating pres-
sure. All equipment pressure rating and warning
tags should be left intact.
Product changes
Hog Technologies is committed to the continuous
improvement of our products. As a result, some
of the equipment described in this manual or
pictured in the catalog may change or no longer
be available.
All information, illustrations, and specifications
contained in this manual are based on the lat-
est product information available at the time of
publication. Hog Technologies reserves the right
to make changes at any time, without notice, in
colors, materials, equipment, specifications, and
models.
If you have questions about the equipment on
your Stripe Hog, please contact the Customer
support Department at (877) HOG ROAD or (001)
772-223-7393.
Never Alter a Hog Technologies Product
Do not alter any product without written consent
from the manufacturer. Any alterations could have
serious consequences including bodily harm or
death. Alterations without manufacturer consent
will void the warranty.
Inspect Equipment
Inspect the condition of all components prior to
use. Do not use any item that is in questionable
condition. Use only components which are marked
with the recommended operating pressure. Never
exceed the operating pressure of the weakest
component in the system.
IMPORTANT NOTE:
YOuR HOG TECHNOLOGIES EquIPMENT uSES INTERNAL
COMBuSTION ENGINES AND FLAMMABLE FuEL. EvERY
PRECAuTION HAS BEEN TAKEN BY HOG TECHNOLOGIES
TO REDuCE THE RISKS ASSOCIATED WITH POSSIBLE
INJuRY AND DAMAGE FROM FIRE OR EXPLOSION, BuT
YOuR OWN PRECAuTION AND GOOD MAINTENANCE
PROCEDuRES ARE NECESSARY TO ENSuRE THE SAFE
OPERATION OF YOuR EquIPMENT.
Tractor Loading and Unloading
The tractor and ramp can be damaged when
loading or unloading the optional tractor. It is im-
portant to take your time and watch your ground
clearance as the tractor is moved to or from the
truck or skid unit platform.
Store Components Properly
Protect all components from damage when not in
use. Secure for travel.
Freezing Conditions
System hoses and the waterblasting heads and
system should be drained of all water or filled
with an anti-freeze solution. For the 40K pump
system, refer to pump manufacturer’s procedures
for maintaining equipment in freezing climates. If
the unit is operated in freezing temperatures or
even temperatures below 60 degrees Fahrenheit,
it is necessary to operate the system with the
high pressure pump engaged and the engine set
at IDLE speed only, until the oil temperature rises
above 60 degrees Fahrenheit.
1.2 Blasting Safety
Safety First – ALWAYS!
Whenever the high pressure pump is engaged for
setting pressure or operations, always be sure
work area is clear of people, hands, feet, etc.
before engaging the high pressure (40k) switch.
WARNING
INJuRIES FROM uLTRA-HIGH PRESSuRE WATERBLASTING
ARE vERY SERIOuS AND CAN RESuLT IN A FATALITY.
ALWAYS MAKE SuRE ALL PERSONNEL ARE A SAFE
DISTANCE FROM THE WORK AREA BEFORE THE PRESSuRE
PuMP IS ENGAGED. NEvER PuT HANDS, FEET OR ANY PART
OF YOuR BODY IN OR NEAR THE HIGH PRESSuRE STREAM.