79
Section 3 - Operation
• Blast Head Shroud Wear Brush Adjustment - If
the wear brush wears or the shroud clamps
become loose and the brush looses contact
with the pavement, the wear brush will need to
be adjusted. Make sure the Hog Arm is in the
down position with the castor wheels firmly on
the pavement. Loosen the clamps and adjust
the wear brush so it is making light contact
with the pavement, then tighten the clamps.
• Adjust caster wheel height - Adjustment may
be required to increase shroud distance from
the pavement to clear obstacles like road
markers or decrease clearance when no ob-
stacles are present. Remove the safety pin,
then rotate the handle on each caster to set
the height. Reinsert the safety pin to lock the
adjustment.
•
Drain Vacuum Canister - The vacuum canister
must be checked frequently during operation
and drained when more than 6” of water has
accumulated in the bottom. Shutdown the
vacuum system, uncoil the drain hose and
open the canister drain ball valve. Make sure
to close the valve and coil the hose before
resuming operations.
• Clean The Vacuum Filter - The filter should
be cleaned at the start of each shift and may
require cleaning during the shift If reduced
vacuum pressure is indicated. Shutdown
the vacuum system. Open the door on the
vacuum canister, then remove and clean the
filter. Reinstall the filter, then close and latch
the door.
•
Drain Debris Tank Water - If the debris tank
becomes full of water during a shift, it must be
drained to avoid an unexpected vacuum sys-
tem shutdown. Shutdown the vacuum system
and open the tank gravity drain valve. Close
the drain valve when draining is complete.
Содержание SK5500
