51
51
Section 2 - Stripe Hog Systems
2.10 Optional Hog Tool
Auxiliary Connection
General
When this option is installed, an optional Ground
Hog or other Hog Tool is connected to the aux-
iliary connections. The electrical system senses
that the tool is connected and the levers on the
tool then control Ultra-High Pressure water to the
blast head and hydraulic fluid flow to the spray
bar motor. Ultra-high pressure water, hydraulic
power and vacuum are provided by the skid water
blasting system.
Control Harness Connection
An electrical harness that runs from the outlet
plug on the truck to a plug on the ground hog
connects the control switch levers on the tool
with the water blasting electronic control system
on the truck. Once the harness is connected, the
operator controls the high pressure water and
hydraulic systems on the tool blast head with the
control switch levers on the tool.
Hydraulic Connection
Hydraulic hoses with quick disconnect fittings are
connected from the tool to the truck hydraulic
system at the auxiliary tool connection. The hy-
draulic control lever and speed control knob on
the tool provides the operator with full control of
the hydraulically activated motor that rotates the
spray head.
Vacuum Connection
Hand operated tools like the Ground Hog (Walk
behind) are equipped with a Hog Head that is
designed to be attached directly to the vacuum
system. The hose quick disconnect fittings provide
vacuum from the truck vacuum system to the
Hog Head. Once the hose is connected, vacuum is
supplied to the tool whenever the water blasting
system is activated.
Make sure to protect the hoses from damage and
abrasion from dragging on the pavement. This
is particularly important when working a long
distance from the truck. In some situations anti-
chaffing protection may need to be added to the
hoses to protect them in contact areas.
Ground Hog/Walk Behind Hog Tool
Typical Auxiliary Tool Connection
Содержание SK5500
