Hog Technologies HT1000SR, Руководство по эксплуатации

Страница: 33 / 90

33
Section 2 - Components
WARNING
REFER TO THE GENERAL SAFETY SECTION OF THIS
MANuAL FOR A LIST OF PRECAuTIONS TO BE OBSERvEd
WHEN OPERATING OR SERvICING uLTRA HIGH PRESSuRE
EquIPMENT. uSE ONLY THOROuGHLY TRAINEd PERSONNEL
TO PERFORM MAINTENANCE OR REPAIRS ON THE HIGH
PRESSuRE SYSTEM.
Take care of your hoses. Protect the hoses from
contact with sharp objects, abrasive surfaces and
foot or wheel traffic. Add additional anti-chaffing
material to protect hoses when necessary. Never
operate the high pressure system with a hose that
is questionable.
When replacing damaged or worn hoses, check
the burst rating marked on the hose. Do not use
a high pressure hose that does not have a listed
burst rating or with a burst rating of less than
54,000 PSI (3,723 Bar). To ensure you are using
the correct hoses, we recommend that you only
use hoses purchased from Hog Technologies.
Retire a UHP Hose from Service if:
A) Cover is damaged and reinforcing wires are
exposed to rust and corrosion;
B) Cover is loose, has blisters or bulges;
C) Hose has been crushed or kinked;
D) End fitting shows evidence of damage, slippage
or leakage;
E) Hose has been exposed to pressures of 2 times
the operating pressure.
F) Hose has been kinked, stressed or stretched.
DANGER
ATTEMPTING TO TIGHTEN A LEAKING FITTING WHILE
uNdER PRESSuRE CAN RESuLT IN SERIOuS INJuRY
OR dEATH. ALWAYS RELIEvE THE PRESSuRE BEFORE
ATTEMPTING TO TIGHTEN ANY HOSE OR FITTING.