Hofmann SML 10, Руководство по эксплуатации

Страница: 25 / 42

- 19 -
mistake checking clearing
uneven pile heights
a. regular differences
correct feed wheel + needle
adjustment guide food page 07
adjustment blade position page 06
b. irregular differences pressure tension wheel 030 to
feed wheel 006
yarn flow is easily
yarn tunnel free of dirt clean
yarn contacted parts free of dirt clean
blade screw 042 tighten
driver disc 012 tighten
yarn blows back
yarn cannot be fed
adjustment of blade page 06
adjustment of airblow page 07
guide tube /anvil is weared out change
stretching of primary backing page 27-29
yarn not cutted sharpness of blade / anvil page 22
position of blade page 7 point 8.8
(turned 180° wrong)
anvil touches blade change 023
bearing of blade shaft change
tension spring strong enough change 023
air blows steady valve
yarn burst open reduce air pressure
gun squeals drop of oil between blade and anvil
maintenance to machine page 09