HNP Mikrosysteme mzr-11507 Скачать руководство пользователя

Страница: 5 / 55

1 General Information

Operating manual mzr-11507

Last update: August 2016

Technical data subject to change without prior notice!.

General Information

This operating manual contains basic instructions to be followed during

integration, operation and maintenance of a mzr

micro annular gear pump.

For this reason it is necessary to read it carefully before any handling of the

device. The present manual should always be kept at the operation site of the

micro annular gear pump.

In case assistance is needed, please indicate the pump type visible on the

housing.

1.1

Application scope of the pumps

The micro annular gear pumps described in this manual are suitable for

continuous delivery and discrete dosage of water, watery solutions, solvents,

methanol, oils, lubricating liquids, paints and varnishes as well as many other

liquids.

If you intend to treat any aggressive, poisonous, or radioactive liquids, you

must conform to safety measures as according to the regulations in force. Any

project concerning handling of corrosive liquids should be previously discussed

with the pump manufacturer.

The micro annular gear pumps

must not

be used for invasive medical

applications, in which the liquid having had contact with the pump is re-

introduced to the body.

Micro annular gear pumps exclusively are provided for use in the industrial

area. A private use is excluded.

The micro annular gear pumps

must not

be used in aircrafts and spacecrafts or

other vehicles without prior consent of the manufacturer.

Data concerning resistance of the pumps to the manipulated liquids have been

elaborated according to the best of HNPM's knowledge. However, operating

parameters varying from one application case to another, no warranty for this

information can be given.

Information given in this manual does not release the customer from the

personal obligation to check the integrity, correct choice and suitability of the

pump for the intended use. The use of the micro annular gear pumps should

be conform with technical norms and regulations in force.

If you wish to receive more information than comprised in this operating

manual please contact directly HNP Mikrosysteme.

Содержание mzr-11507
























































Результаты поиска

Содержание mzr-11507

Отзывы:

Похожие инструкции для mzr-11507

Бренды по названию

Популярные бренды

HNP Mikrosysteme mzr-11507, Руководство по эксплуатации

Результаты поиска

Содержание mzr-11507

Отзывы:

Похожие инструкции для mzr-11507

Бренды по названию

Популярные бренды