HNP Mikrosysteme mzr-11507 Скачать руководство пользователя

Страница: 43 / 55

12 EC Directive

Operating manual mzr-11507

Last update: August 2016

Technical data subject to change without prior notice!.

EC Directive

A Directive or EC Directive is a legal instrument of the European Community

addressing at the member states and forcing them to implement specific

regulations or targets. Leastwise, micro annular gear pumps are covered, by the

scope of application of the following Directives: The following directives are of

importance for the user of the described micro annular gear pumps:

Low-Voltage Directive (2014/35/EU)

The Low-Voltage Directive is relevant for micro annular gear pumps described

in this manual.

Machinery Directive (2006/42/EC)

A micro annular gear pump is a machine and is consequently covered by this

Directive. However, it may be a part of a machine or installation.

EMC Directive (2014/30/EU)

The Directive on Electromagnetic Compatibility (EMC) applies to all electronic

and electrical devices, installations and systems. Consequently, the frequency

inverter for the micro annular gear pump is covered by the EMC Directive.

RoHS Directive

(

2011/65/EC)

To our knowledge our products delivered to you do not contain substances or

applications in concentrations that are forbidden by this directive. No

substances contain our products delivered to you after our current knowledge

in concentrations or application, the placing on the market in products

according to the valid requirements forbade to the Directive.

WEEE Directive (2002/96/EC)

Disposal of micro annular gear pumps has to be environmentally sound.
All materials and liquids have to be recycled in accordance with the relevant

regulations. Electrical parts can not be disposed of as household waste. They

have to be delivered to designated collection points.

Содержание mzr-11507
























































Результаты поиска

Содержание mzr-11507

Отзывы:

Похожие инструкции для mzr-11507

Бренды по названию

Популярные бренды

HNP Mikrosysteme mzr-11507, Руководство по эксплуатации

Результаты поиска

Содержание mzr-11507

Отзывы:

Похожие инструкции для mzr-11507

Бренды по названию

Популярные бренды