5 Optional modules
Operating manual mzr-11507
Last update: August 2016
Technical data subject to change without prior notice!.
17
In case the pump is not installed in the standard way (pump name read
horizontally), it is possible to shift the outlet and inlet openings of the pump.
However an appropriate supply of the sealing liquid should still be ensured and
all presence of air bubbles within the fluidic seal chamber should be avoided.
Use of the fluidic seal accessories
!
The fluidic seal set is mounted at the bottom inlet (see figure 8).
During assembly it is important to check if the ferrule is tightly attached to the
tube and that the tube is tightly screwed to the inlet of the fluidic chamber.
figure 9
Assembly of the fluidic seal accessories (standard version)
Liquid supply set in stainless steel version (as separate accessory)
Stainless steel liquid supply set is available on request. The use is the same as
with the standard version. The liquid supply is done by a glass syringe.
figure 10
Stainless steel set for the fluidic seal module
