HNE MFU 50-150, Руководство пользователя

Страница: 8 / 36

Mobile Foam Unit Version 50-150 8 of 36
2.7 Electrical safety
The unit has a self-contained power supply (12 Volt DC) for the electrical control and the
on-board starter battery
(alternator on the engine with external rectifier/charger).
REMEMBER:
Use only approved 12-volt car battery chargers to recharge the battery.
Charge the battery only with the ignition off. Do not overcharge.
Prolonged current draw at the socket with the engine not running can lead to an
exhausted Battery.
Replace blown fuses only with ones of same type and amperage.
All electrical components are water-protected. Nevertheless - avoid dirt, chemicals, splash
water and dampness around the device whenever possible.
Disconnect the negative terminal of the battery when working on the engine and/or the
electrical system.
DANGER !
Risk of short circuit or electric shock !
In case of damage to the electrical system: Never touch bare
wires or voltage leading components if the engine is running or
the ignition is active. Repair damaged cables as soon as
possible
Risk of electric shock !
In case of loose connectors or damaged insulation, the vicinity
of spark plugs and ignition cables can bear high voltage while
the engine is running
The 12V-socket at the rear panel is DIN 14690 compatible
and permanently active. It is useable to charge the battery or
for loads up to 140 Watts (maximum 12 Amp.)