HNE MFU 50-150, Руководство пользователя

Страница: 21 / 36

Mobile Foam Unit Version 50-150 21 of 36
7.8 Turbo jet gun
The MFU is equipped with a high-power jet gun, which is
adapted to pressure and flow rate of the diaphragm pump.
This allows for optimum range and performance. The jet
shape ranges from compact beam to spray mode and is
adjustable steplessly. The throughput can be set to 40, 80
or 130 liters/min. At reduced settings (40 and 80 liters);
excess water is diverted into the bypass line.
1
2
1) Jet mode setting:
Turn the red Ring at the
Nozzle to adjust the jet
mode from full stream
to spray
2) Flow rate setting:
Turn the fluted collar to
set the throughput to 40,
80 or 130 liters/min.
ATTENTION

Drain the water from the mechanics
after every use. Press and hold the
pushbutton at the rear end and swing
the gun a few times down.

After turning off the MFU, actuate
the trigger to relieve any residual
pressure.
When set to full flow, a significant blowback occurs at the turbo gun.
Take a firm stand and hold the gun with both hands when triggering. DANGER