HMS Anybus HMS-EN2MB-R, Руководство пользователя, Страница: 48 / 72

Appendix D: Modbus-TCP Client Configuration Manager 46 (70)
Available Settings for the EtherNet/IP Network
Setting Description
IP address If not detected automatically, set these items manually.
Subnet mask
Gateway
DHCP
If enabled, the linking device can obtain TCP/IP settings from a DHCP server.
Ethernet settings 1 Network speed and communication model.
Ethernet settings 2
Secure Host IP
Configuration Protocol
(HICP) If enabled, the linking device can be found on the network using the IPconfig tool.
When Modbus-TCP
(Network 2) error The "Freeze data to master" option instructs the linking device to keep sending the latest
received data from the Modbus-TCP network to the EtherNet/IP scanner.
The "Clear data to master" option instructs the linking device to clear the input data area and
send only zeros to the EtherNet/IP scanner.
I/O mapped control/
status word If enabled, the control/status word is mapped to the output/input area respectively.
I/O mapped live list
If enabled, the live list is mapped to the input area.
D.3 Tools
D.3.1 HMS EN2MB-R Management
Apply Changes
Permanently store changes made to the configuration and reboot, using the new configuration.
No changes made in the configuration will be permanently stored or used by the linking device
until they are applied by clicking “Apply”.
Before storing and rebooting, the linking device will validate the not yet stored configuration. If
errors are found, the linking device will produce an information message with instructions to
correct the errors. The linking device will not store an invalid configuration.
Reboot and Undo Changes
The linking device will be restarted. All changes made since current active configuration will be
undone.
Undo Changes
Undo all changes made since current active configuration.
Factory Reset
Reset the linking device to completely remove the configuration currently stored in the module.
Wink Device
Clicking the “Wink device” button will start a 15 second LED sequence on LEDs 1, 5 and 6 on the
linking device. For identification purposes.
D.3.2 Backup and Restore
Backup the configuration that is currently used to file, or restore a previously saved configuration
from file.
It is not possible to backup or restore the configuration until all changes are either applied or
undone.
Linking Device User Manual
scm-1202–181 2.0 en-US