HMS Anybus HMS-EN2MB-R Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 72

HMS Anybus HMS-EN2MB-R Скачать руководство пользователя страница 17

15 (70)

•

Transactions will be added to connections in the order they are created in the Modbus
configuration manager.

If a transaction does not fit into the remaining parts of a connection, it will be moved to the
next connection.

The bytes left in the previous connection will then be padded and left unused.

Consequently, take care when creating the Modbus transactions, to optimize the available
memory in the input and output IO areas as much as possible.

Changes made to the configuration will not be used by the linking device before they are applied and
saved.

See also

Modbus-TCP Client Configuration Manager, p. 39

See also

Modbus-TCP Functions, p. 37

.

4.5

Studio 5000 Configuration Example

This example will guide you through the steps to create a basic configuration for theEtherNet/IP
to Modbus-TCP linking device.

1.

Start the Studio 5000 software.

Expand the

I/O Configuration

folder in the tree view.

Right-click

Ethernet

and select

New Module

.

Linking Device User Manual

scm-1202–181 2.0 en-US

«
...
15
16
17
18
19
...
»

Содержание Anybus HMS-EN2MB-R









































































Отзывы:

Нет отзывов