HMS Anybus HMS-EN2MB-R Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 72

HMS Anybus HMS-EN2MB-R Скачать руководство пользователя страница 11

9 (70)

3

Installation

3.1

External View

Use the SD card slot with care. Do not use an SD card for configuration backups. A backup
of the configuration is always stored in the Studio 5000 project. The configuration in the
linking device and in Studio 5000 must match for operation. See

SD Card Functionality, p.

.

A: Power Connector

This connector is used to apply power to the
linking device. It is also possible to connect
protective earth (PE) to the power connector.
See

Power Connector, p. 11

and

Power Supply, p.

B: SD Card Slot

This slot adds the possibility to store and load
configurations from an SD card.
Use with care. A backup of the configuration is
always stored in the Studio 5000 project. The
configuration in the linking device and in Studio
5000 must match for operation.
See

SD Card Functionality, p. 65

C: USB Port

This port adds the possibility to connect a PC to
the linking device to perform firmware upgrades.
See

USB Connector, p. 12

D: Status LEDs

See

Status LEDs, p. 29

E: DIN Rail Connector

The DIN-rail mechanism fastens the linking device
to a DIN-rail and connects the module to
protective earth (PE).
See

Mounting the Linking Device, p. 9

.

F: EtherNet/IP Connectors

See

EtherNet/IP & Modbus-TCP RJ45 Connectors,

.

G: Modbus-TCP Connectors

2–port switch with daisy chain functionality.
See

EtherNet/IP & Modbus-TCP RJ45 Connectors,

.

3.2

Mounting the Linking Device

The EtherNet/IP to Modbus-TCP Linking Device can be physically installed either by mounting it
onto a DIN-rail or, if installed in areas exposed to vibration, by mounting it on a wall for more
stability.

Linking Device User Manual

scm-1202–181 2.0 en-US

«
...
9
10
11
12
13
...
»

Содержание Anybus HMS-EN2MB-R









































































Отзывы:

Нет отзывов