HMS Anybus HMS-EN2MB-R, Руководство пользователя, Страница: 13 / 72

Installation 11 (70)
Step
Description Visual Description
Open up the package containing the wall
mounting accessories.
- One metal frame
- Industrial velcro
- Four plastic vibration dampers
Remove the plastic protection from one
side of the velcro.
Attach the velcro to the metal frame.
Attach the four plastic vibration dampers
to the linking device, on the side that will
face the wall.
Remove the plastic protection from the
other side of the velcro.
Turn the device around, so that the
plastic vibration dampers face
downwards.
Fasten the metal frame to the device by
pressing the frame firmly against the
device, making the two velcro parts
attach to each other.
Attach the metal frame and the device to
a wall using screws and washers (not
enclosed).
3.3 Power Connector
Pin no Description Connector
1 +24 V DC
2 GND
3 FE (Functional Earth)
Use 60/75 or 75xC copper (CU) wire only.
The terminal tightening torque must be between 5... 7 lbs-in (0.5... 0.8 Nm)
Linking Device User Manual
scm-1202–181 2.0 en-US