131 (148)
•
Loading package from remote web server failed (code
<x>
)
Loading an update package from a remote web server failed. The message shows a code,
which is either a positive HTTP response code or a negative error code from the HTTP client:
-1
An invalid URL was provided.
-2
Opening TCP socket failed
-3
Setting TCP socket options failed
-4
Connection could not be established
-5
Connection refused by remote web server
-6
SSL client could not be started
-7
SSL handshake failed
-8
Sending data to remote web server failed
-9 or -10
Receiving data from remote web server failed
-11
Internal buffer is too small
-12
IP address of remote web server could not be determined
-13
File input/output failed
-14
Invalid HTTP header format
-15
SSL session could not be created/closed
-18
Operation timed out
-19
Out of memory
If you see an error code that is not on the above list, please contact the customer support.
•
The type of the package's signature does not match the expected type of signature.
(
<signature type>
)
Update packages are signed. From time to time new types of signatures are introduced. If
the signature type of the update package does not match the signature type expected by
the firmware, the update package was probably generated for/by an older or newer
firmware version. It may be possible to convert the update package to the expected format
using a special tool.
•
Invalid package flag(s) (
<flags>
)
The current update package has invalid flag(s) set. The message shows the package flags
bitmap as a hexadecimal number.
•
Firmware name does not match. This package is for "
<firmware name>
" firmware.
The current update package is not intended for the HMS Hub firmware. The firmware that
the package is intended for is shown.
•
This package cannot be applied to the current firmware version.
The current update package cannot be applied to the current firmware version, because the
package requires a minimum or maximum existing firmware version and the current
firmware version does not match.
•
Target name does not match. This package is for "
<target name>
" target.
The current update package is intended for another target hardware. The target that the
package is intended for is shown.
•
Variant name does not match. This package is for "
<variant name>
" variant.
The current update package is not intended for this variant of the HMS Hub firmware. The
variant that the package is intended for is shown.
•
This package is limited to the device with the MAC address
<MAC address>
.
The current update package is intended for a certain device. The message indicates the
MAC address of the device the package is intended for.
Anybus Edge Gateway Reference Guide
SCM-1202-154 1.0 en-US
