Hitecsa ADISA ADI CD 105, Техническое руководство по установке, использованию и обслуживанию

Страница: 38 / 69

ADI CD Boiler – Technical Manual
38
14. DOMESTIC HOT WATER (D.H.W.)
Connect the storage tank sensor to B3 input (see the following electric drawing)
If there is demand for DHW, the heat sources can be switched on at any time. The strategy is to produce the
amount of heat required at a certain point in time – and no more. For that purpose, switching programs, different
setpoints and release criteria are available.
To activate the DHW circuit, proceed on follows:
On the navigation bar, turn the control knob until "
Domestic hot water page
" is preselected. Press the
control knob to enter. Turn the rotary knob until the parameter " Operation mode " is preselected. Press the
control knob and the value is selected. Turn the control knob to set the operation mode to:
-
Off
: Hot water heating is switched off.
- On : Hot water is heated to the nominal setpoint as per time program.
Press the control knob to confirm.
To return to the display of the general parameters. Press the rotary button for 5 seconds. The "
Start " page
opens.
Setpoints
0 10 20 30 40 50 60 70 80 90 100 °C
1612
1610
1614
7
47
1
z9
1
/0
9
1
0
a) System drawing: 1 Boiler and Domestic Hot Water (DHWS)