Hitecsa ADISA ADI CD 105, Техническое руководство по установке, использованию и обслуживанию

Страница: 18 / 69

ADI CD Boiler – Technical Manual
18
General symbol
The following symbols are located on the navigation bar (left, vertical):
Accessible for end-user and experts:
Start page: Plant status. Access to plant switch (or zone switch).
Temperature page. Access to heating and cooling.
Domestic hot water page. Access to hot water handling.
Info pages:
•
Messages (errors, events).
•
Plant information.
•
Energy data and consumption on a time axis.
Service/setting pages:
1. Setting options on device or plant.
2. Operate special operations (e.g. for maintenance work).
3. Login in expert view (see note below).
Available in addition for experts:
Diagnostic pages: Analyze and test plant.
Adjust/repair pages:
•
Adapt parameters in 'Complete parameter list'
•
Access to commissioning wizards
The following symbols can be displayed on the status bar (top, horizontal):
Symbol 'Alarm' indicates a plant error.
Symbol 'Maintenance/Special operations' indicates the presence of a maintenance message or
special operation feedback.
Symbol 'Event' indicates an event message from the plant.
'Hand' symbol is displayed if the plant/zone switch setting is changed by making an adjustment
on the topic pages.
Adjustments made on the topic pages can be reset at the plant/zone switch.
12:00 The device clock is synchronized with the clock from the connected controller
Symbol 'User' and the number to the right (access level 1 to 3) indicate which user level is
currently active.
1: Commissioning engineer
2: Heating engineer
3: OEM
Symbol 'Producer' indicates the main producer (e.g. oil/gas boiler, heat pump) that
is currently switched on.
The following symbol can be displayed in the work area:
The back arrow returns from the work area to the navigation bar.