![background image](http://html.mh-extra.com/html/hitachi/vt-fx980e/vt-fx980e_instruction-manual_147212067.webp)
67
ADDITIONAL
O
PERA
TIONS
EDITING — Tape Dubbing
Turn on the VCR and TV, then set the TV to the
video programme number.
2
COMMERCIAL ADVANCE
PROG
REC/
IRT
REV
FWD
TAPE
NAVIGATION
L (MONO)-AUDIO IN-R
VIDEO IN
VIDEO LINK
To Scart or DECODER socket
Recording VCR
Video equipment for playback
To AUDIO IN (L), (R)
To VIDEO IN
OR
VIDEO LINK
CA
Controls
VCR Display
1
Press the AUX button
to display “L1”, “L2” or
“L3” in the VCR display.
Select “L3” to dub the source input via the VIDEO
IN/AUDIO IN jacks, “L2” to dub the source input
via the DECODER socket or “L1” to dub the source
input via the Scart socket on the back of the VCR.
If “L1”, “L2” or “L3” is not displayed, the picture
of the TV programme being received will be
dubbed.
3
Insert a cassette
into the VCR for recording, and
the cassette to be copied into the playback VCR.
4
COMMERCIAL ADVANCE
PROG
VIDEO LINK
RE
IR
VIDEO LINK
CA
Connect the second video equipment to this VCR
as shown above. (Refer to the manual of second
video equipment for connection)
If the playback video source is connected to the
Scart socket, the TV can be connected to the RF
OUT terminal or any other Scart sockets of this
VCR.
Note:
If using this VCR for playback during
dubbing or other operation, you must use the
black scart socket as a connector source.
VIDEO
PROGRAMME
NUMBER
COMMERCIAL ADVANCE
PROG
VIDEO LINK
PROG
PROG
AUX
VCR/TV
OPERATE
TV
AUX
VIDEO LINK
CA