11
SETTING
UP
AUTO INSTALLATION FUNCTION
Controls
VCR/TV screen
Auto Install (Plug & Play) function
This automatically tunes all broadcast channels, sets the clock and date.
Switch on the mains supply socket after
completely connecting all leads (as described on
pages 6 and 7).
The VCR will be in standby mode at this stage
and the VCR display will show “ – – : – –”.
Press the OPERATE button.
“
” will appear in the VCR display.
During this time, if your set-up includes Scart
connector and the TV is set to Scart input, the TV
screen will display as shown.
After this process is complete, the RF output
channel will appear in the VCR display.
For Example, RF output channel 35.
COMMERCIAL
VIDEO LINK
(OPERATE)
VIDEO LINK
CA
COMMERCIAL ADVANCE
PROG
NK
R
VIDEO LINK
CA
1
2
3
Exit
=
MENU
AUTO
COMMERCIAL ADVANCE
PROG
NK
VIDEO LINK
CA
Switch on your TV and select an unused
programme number, i.e. one not used for BBC1,
ITV, etc.
(Please consult your TV instruction
manual as your TV may have a special VCR
programme number which must be used.)
Note:
This programme number will be your VCR
programme from now on.
4
6
5
If “
” appears, press the stop button on the
VCR or on the remote control handset. The RF
channel data will appear in the VCR display. Press
the PROG
▲
or
▼
button on the VCR to change
the RF channel to “
”. To stop the RF
output, press the stop button on the VCR or on
the remote control again.
COMMERCIAL ADVANCE
PROG
REC/
IRT
REV
FWD
TAPE
NAVIGATION
Tune your TV (consult your TV instruction
manual) until the test pattern shown appears.
The correct tuning position is when the picture is
clear. Ensure this programme is stored in your
TV.