Hitachi VisionBase 8450H, Руководство по эксплуатации продукта

Страница: 108 / 126

Ch 4: System Environment Settings
104 Hitachi PC VisionBase 8450H/R Server
3.
Choose the SCSI device for which you want to change settings.
The following screen is displayed. To change the setting of an item, move the cursor to that item, then press
key. From the list of items displayed, select the one you want with arrow keys , then press
key. See descriptions in “Sync Rate (MBytes/sec)” on page 104 onward for each item.
4.
When you complete the setting, press key or choose [Exit this menu].
The screen for step 2 is displayed.
5.
Press key or choose [Exit this menu].
The menu for step is displayed.
6.
Press key or choose [Exit this menu].
The following menu is displayed. Unless you changed settings in step 3, you will return to the Main Menu.
7.
Choose [Save Changes].
This saves the settings and returns to the Main Menu. If you want to return to the Main Menu without saving the
settings, choose [Cancel Changes]. To not return to the Main Menu, choose [Cancel Exit].
Sync Rate (MBytes/sec)
Used to set a transfer rate in MBytes/sec. Use the default “10” for the Narrow-SCSI controller; change the setting
to “20” for the Wide-SCSI controller.
Narrow-SCSI
•
Off
•
5
•
10: (default)
Wide-SCSI
•
Off
•
10
•
20: (Hitachi PC VisionBase 8450H/R Server setting value)
•
40
•
80: (Default)