Hitachi VisionBase 8450H, Руководство по эксплуатации продукта

Страница: 10 / 126

Ch 2: Installation and Use of Devices
6 Hitachi PC VisionBase 8450H/R Server
Notes on Handling for Each Device
System Equipment
•
Be sure to install the equipment horizontally on the floor. Avoid installing it on a table or stand. If necessary,
insert cardboard or equivalent between the equipment and the floor for adjustment.
•
Avoid sitting on the equipment; otherwise you could fall off or suffer from an electric shock.
•
Avoid putting vases, beverages, or similar things containing water or the equipment; introdoction of water into
the equipment could cause short-circuit.
•
Avoid using the system equipment with its cover removed or with the storage bay door open; otherwise an
electric shock or a failure could be caused.
•
revent the side covers from shock, because the equipment contains hard disk drives and other devices, which are
susceptible to shock.
•
When moving the equipment, do not let the equipment hit surrounding materials.
•
void blocking the vent holes on the front and back of the system equipment; insufficient ventilation could cause
a failure of the equipment. Inspect the vent holes for dust constantly and clean them periodically.
•
Keep the door key (attached to the system equipment) properly. If you lose it, it will become necessary to replace
the entire key unit. If such is the case, consult the store where you bought the equipment.
•
While the system is being started up, avoid executing keyboard resetting (Ctrl + Alt + Delete); otherwise a
system error will occur.
Keyboard and Mouse
•
Prevent water from splashing on the keyboard or mouse.
•
When cleaning, use soft cloth such as cotton cloth with a small quantity of water sprayed. Avoid spraying water
directly on the keyboard or mouse and wiping it with wet cloth.
Displays
•
Keep sufficient space around so that when swiveled the display does not hit any surrounding material.
•
Avoid putting things on the display; otherwise ventilation could be insufficient for the display to be cooled
properly, resulting in a failure.
•
eep the display away from magnets and loudspeakers to prevent color drift.
•
Keep at least 70 cm between two displays to prevent interference in magnetic fields.
It is recommended that you constantly make backup copies of data to ensure uninterrupted operation.
A failure in the system equipment or power outage could cause the data in your system to be lost.
Only Hitachi products are guaranteed. If products of other companies are used, operation cannot be
guaranteed.
Only Hitachi products are guaranteed. If products of other companies are used, operation cannot be
guaranteed.