Hitachi S10mini D, Руководство по оборудованию

Страница: 7 / 132

PROHIBITION
Do not install, wire, handle, or remake the programmable controller beyond
such an extent as may be defined in this manual. We will not be liable for
any damages to our programmable controller and ancillary equipment and for
physical injury arising out of such actions.
See Chapter 1 on page 9.
Keep the insulating sheets in position to insulate the mount base from the
enclosure.
Never insert fingers or foreign matter into the clearances between parts of the
connectors and mount base.
See Chapter 4 on page 32.
Do not install, wire, handle, or remake the programmable controller beyond
such an extent as may be defined in this manual. We will not be liable for
any damages to our programmable controller and ancillary equipment and for
physical injury arising out of such actions.
To prevent noise-caused malfunctioning, keep the 100 VAC/VDC cable and
the network cable at least 100 mm apart from each other, rather than bundle
them together.
See Chapter 5 on page 49.
PROHIBITION
Do not disassemble the module.
See Chapter 4 on page 33.
Except the CPU battery, the internal parts are not customer-serviceable. We
will not be liable for any damages to our programmable controller and ancillary
equipment and for physical injury arising out of such actions. If the module
should fail, replace it in its entirety.
See Chapter 9 on page 105.