E-32
2
1
2
1
3
Notes on attaching the non-water supply auto steamer
Wash the inner lid to clean and unclog it.
Do not attach the plate upside down.
Insert the lower hook of the plate into the lower guide on the inner lid.
Prevent the lid packing from being caught.
Align the upper hook of the plate with the upper guide, and
push the plate until it clicks into position.
Attach the plate to the inner lid.
Attach the non-water supply auto steamer to the lid.
Insert the hooks into
the slots with the lid
packing facing forward.
If you fail to insert both
hooks, they may be
damaged when the
inner lid is closed.
Push the release lever up
and push the upper part
of the inner lid into place.
Move the release lever
down.
Hook
k
Hook
Wash away any dirt on the plate, or
clogs in holes in the plate.
Non-water supply auto steamer (Plate and inner lid) (wash after each use)
Remove the non-water supply auto steamer
from the lid.
While holding the lid tab, push up the release lever.
●
The non-water supply auto steamer is composed of the inner lid and plate.
●
Remove the steam cap from the lid and wash it using neutral dishwashing detergent and a sponge or similar soft material.
e
e
e
e
Lid
ta
b
b
Li
Lid ta
tab
Separate the non-water supply auto
steamer into the inner lid and the plate.
Do not pull the packing attached to the plate. It is not
detachable. If the packing is deformed, the amount
of water that collects in the plate will be reduced.
Push down the plate lever and remove the plate.
1
2
3
4
After rinsing, wipe away all moisture and dry
thoroughly.
5
6
7
Lever
Plate
Lever
Plate
Inner lid
Inner lid
Upper
guide
Upper
hook
L
k
h
k
k
k
Lower guide
ower guide
L
L
Lo
e
e
owe
Lo
Low
owe
we
o e
oo
Lower hook
ower hook
ower hook
h
k
k
k
o
Lo
Low
owe
wer hook
ATTENTION
Hot water and water will spill out, so
take it apart in a sink.
ATTENTION
Do not tilt the non-water supply auto
steamer when carrying it. Otherwise,
water or hot water may spill from it.
Lid
Lid
Slots in the lid
Hook
Lid packing
Auto steamer
Auto steamer
Cleaning and Maintenance (cont.)
Both hooks are
inserted into the
slots.
Hooks are not
inserted into
slots.
If either of the hooks on both sides is not inserted
into the slot in the lid, the hooks may be damaged
or deformed when the lid is closed.
To prevent cooking from being
able to be started if you forget
to install the non-water supply
auto steamer, the lid will not
close with moderate force.
(The lid closes when the inner
pot is not set.)
ver
e
ver
r
v
e
e
ev
ver
v
e
e
lev
eve
ver
1
1
2
3
3