E-15
1
4
5
6
2
3
1
3 5 2 4 6
●
If no operation is performed for
approximately three minutes,
your setting is automatically
accepted.
●
Pressing the "Cancel/Off"
button enables you to return to
the initial view even during
setup. Any settings you have
not confirmed will be reset.
The display shown after enabling
the clock display
(When the rice cooker is unplugged)
How to Switch LCD Displays
Insert the power plug into a power
outlet
*The indication of the type of rice and program is provided as an example.
(To display the clock even when the power plug is disconnected from the power outlet)
●
By default, the clock display is disabled.
Use the following steps to enable it.
●
If the rice cooker is unplugged when the LCD display is operated on the built-in battery, the display may become dim
and then return to normal. This is because the power source is switching to its built-in battery, and is not a malfunction.
Press for approximately
five seconds to switch to a mode
in which to change settings.
Press or to show "P2-"
on the display.
●
Press to move to the next item. Press
to move back to the previous item.
Press .
●
Press to change the LCD display setting.
Press or to switch the
settings.
●
The display changes each time you press or .
Press to confirm your settings.
●
Pressing enters your settings and the
screen returns to the initial display.
(Setting the melody
of an alarm)
(Setting the
LCD display)
(Setting Plate Condensation
Reduction mode)
(If you are concerned
about odors)
P.E-16
P.E-17
P.E-34
(Goes off)
(Lights up)
Lights up
Lights up