E-17
1
4
5
6
2
3
1
3 5 2 4 6
●
Pressing the "Cancel/off"
button enables you to return to
the initial view even during
setup. Any settings you have
not confirmed will be reset.
P.E-28
●
If no operation is performed for
approximately three minutes,
your setting is automatically
accepted.
Press .
●
Press to change the "Plate Condensation
Reduction mode" setting.
Insert the power plug into a
power outlet
How to switch to Plate Condensation Reduction mode immediately after cooking
●
Condensation collects on the inner lid and other plate immediately after cooking is completed in order to keep the surface of the rice from drying. If
you are concerned about condensation, you can switch to Plate Condensation Reduction mode in which the length of steaming time is increased.
Once the mode is switched, the setting is remembered until you switch it back to the original mode.
Press for approximately five
seconds to switch to a mode in
which to change settings.
Press or to show "P3-" on
the display.
●
The display will be switched each time you press or .
●
Press to move to the next setting. Press to
move back to the previous setting.
Press or to switch the
settings.
●
The display changes each time you press
or .
Press to confirm your
settings.
●
Pressing enters your settings and the
screen returns to the initial display.
When switching to Plate
Condensation Reduction mode
●
Approximately five more minutes
of cooking time will be required.
●
The amount of water droplets that
collect in the plate will reduce.
●
The rice cooker uses high pressure and
thus it has a tight seal, so there will be
some condensation even after switching
to Plate Condensation Reduction mode.
Select "Warm-High" if you are
concerned about condensation
during Keep Warm.
(Setting the melody
of an alarm)
(Setting the
LCD display)
(Setting Plate Condensation
Reduction mode)
(If you are concerned
about odors)
P.E-16
P.E-15
P.E-34
Regular mode
Plate
Condensation
Reduction mode
Lights up
Lights up