Hitachi RHUE-3AVHN, Руководство по обслуживанию

Страница: 140 / 262

Controller pack
Service Manual
138
System MMI Pack (Room unit and RF receiver)
SMGB0066 rev.0 - 12/2009
To bind/rebind:
Hold button on RF Receiver for 15 seconds. LED will flash red 0.1 sec ON, and 0.9 sec OFF. 1.
Hold button on RF Receiver for 5 seconds. LED will flash red for 0.5 sec ON, and 0.5 sec OFF. 2.
Press the 3. button on the Room Unit.
Hold 4. , and buttons for 2 seconds. Display will show “InSt CO”. The boiler and RF signal icons will be displayed.
Press the green 5. button.
When Red LED on the RF Receiver goes off, the devices are bound. 6.
If binding is unsuccessful, then the LED will stay on. In this case, move the Room Unit and repeat the procedure from the 7.
beginning.
The LED on the RF Receiver will flash green every 10 seconds to indicate that the device is live. 8.
Now go to Section 2. Installing the System MMI Pack to setup the system. 9.
4.22.7. room Unit user guide
• description
The Hitachi programmable wireless room unit is designed to control your heating system efficiently, providing comfortable
temperatures when you are at home and energy savings when you are away. The following instructions explain how to
program and use the Hitachi room unit to provide the highest home comfort with a minimum cost.
• features
• Ergonomic user interface featuring an ‘OK-button’.
• Large LCD (Liquid Crystal Display) Screen with backlight.
• 7-day heating program to match your lifestyle, whilst maximising energy savings.
• 6 independent temperature levels per day (from 5°C to 35°C).
• Holiday button saves energy by letting you reduce the temperature for 1 to 99 days.
• Built-in Memory holds the user program indefinitely.
• Controls layout