18
No.
Item
Content
Setting range
Default
8 Operator
Reset
Resetting all the settings of WOP to
the default.
After reset operation, date and time
setting is required.
01: YES
02: NO
NO
9 Check
Mode
Checking whether LED and key etc.
are normal or not.
1.Key & Led Check
2.Lcd Check
3.RTC Check
4.EEPROM Check(NOTE5)
5.Serial Loopback (NOTE6)
6.Debug Mode
7.Firmware Version
-
(NOTE1) When WOP (firmware version 1.00) connecting to WJ200 (Ver.2.0 or above), English ,
Japanese and Chinese are available, while connecting to L700, SJ700, X200 and
WJ200 (version before 2.0) or NE-S1, only English is available.
(NOTE 2) In the case of connecting to WJ200 (Ver.2.0 or above) or NE-S1, Clock display
function (d031) is provided as following diagram.
(NOTE 3) When [Read Lock] is setted to [01: Enable], READ operation is unavailable
(display as follows). Pressing [ESC] key will return to the previous display.
(NOTE4) When connecting to WJ200 (Ver.2.0 or above), please set [
INV Type Select
] to
[01: Type 1]. [read & copy only] will display if [02: Type 2] is selected.
(NOTE5) Please do not execute the [EEPROM Check]. Otherwise, the data (parameters/EzSQ
program) saved in WOP will be erased.
(NOTE6) Please do not execute the [Serial Loopback]. Communication check is not allowed
without proper tools.
d031 Clock
07/18 12:28
F001 6.00Hz
MONITOR-A M1-STOP ALL
Chapter 4
Operation
d001 Output FQ
0.00Hz
F001 6.00Hz
MONITOR-A M1-STOP ALL
Press [ESC] key
READ
Read lock enabled
d001 Output FQ
0.00Hz
F001 6.00Hz
MONITOR-A M1-STOP ALL
READ
ESC
