21
5.2
R/W Storage Mode: Single
・
WRITE function
After pressing the [WRITE] key in any display mode except Read mode and Option mode, the
parameter settings stored in WOP are transferred to the inverter. EzSQ program is transferred
to the inverter automatically after parameter copy is finished if the Inverter supports EzSQ
function. It returns to previous display after write is completed.
When parameter write is completed, it will
return to previous display automatically.
Parameter writing
WRITE
please keep power ON!
WRITE
Data writing...
OPE -> INV
WRITE
Completed
d001 Output FQ
0.00Hz
F001 0.00Hz
MONITOR-A M1-STOP ALL
The Inverter with EzSQ function
The Inverter without EzSQ function
please keep power ON!
WRITE
Data writing...
OPE -> INV
please keep power ON!
WRITE
EzSQ writing...
OPE -> INV
d001 Output FQ
0.00Hz
F001 0.00Hz
MONITOR-A M1-STOP ALL
WRITE
Completed
WRITE
EzSQ writing
Parameter writing
Write “completed” will
display for 2 seconds
Write “completed” will
display for 2 seconds
When write is completed, it will return
to previous display automatically.
Chapter 5
Read, Write function and operation
