Hitachi RAC-10SH3, Руководство по обслуживанию

Страница: 9 / 153

Air Cleaning Mesh Box
DEUTSCH FRANÇAIS ITALIANO SPANISH PORTUGUÊS
∂ÏÏËÓÈο
«®¬¬¥£¤
Replace the air cleaning mesh box. Dž
“Make sure that it clicks into place.”
Dž
“If it dose not click into place, abnormal sounds
may be heard or the box may fall off.” Close the front panel.
Ą
INDOOR UNIT CONTROL
P
ANEL
/ CLEANING UNIT
Open the front panel to operate.
(How to open the front panel, page 8)
Dust Catcher Collects the dust swept by the cleaning unit. (At front and top.) (Page 37)
Cleaning Unit Cleans the dust
caught by the
Dust Box Collects and keeps the dust that has been cleaned. (Page 34)
Stainless Mesh Filter
(inside)
Collects particulates and dusts in the air. (Page 35)
Air Cleaning Mesh Box
Preparation
Stop the air conditioner, and disconnect the power supply (or turn off the circuit breaker). Open the front panel. Pull out the air cleaning mesh box as illustrated to remove it. Insert the air cleaning mesh into the slot as illustrated. Connect the power cord (or turn on the circuit breaker).
Jaw
Wasabi-Nano Titanium Air Cleaning Mesh
With the air cleaning mesh used, the air-conditioning capability will fall slightly. Remove dust from the surface with a vacuum cleaner, and DO NOT clean it with water. (We recommend you clean it once every 6 months and replace it once every 2 years.)
– 5 –
ENGLISH
stainless mesh
filter.
How to Attach the Wasabi-Nano Titanium Air Cleaning Mesh
10_14SH3_OM.indd 5 10_14SH3_OM.indd 5
2012-2-21 14:51:352012-2-21 14:51:35
T
ransmission Indicator
The transmission indicator ROOM TEMPERA
TURE
Button Press this button to set the room temperature. Keep pressing and the value will change more quickly
.
STOP Button
HEA
T Button
Press this button to start heating operation. (Page 14) DEHUMIDIFY
Button
Press this button to start dehumidifying operation. (Page 14) COOL
Button
Press this button to start cooling operation. (Page 15) DR
Y
COOL
Button
Press this button to start dry cool operation. (Page 16) AUTO Button Press this button to start
automatic
operation.
(Page 13)
BUTT
ONS T
O
ST
ART OPERA
TIONS
Remote controller can be used when it is fixed on a wall or pillar using the remote controller holder
.
Before fixing it, make sure the indoor unit can be controlled from the remote controller fixing point.
SLEEP
TIMER Operation Button
Press this button to start sleep timer operation. (Page 29)
REMOTE CONTROLLER
T
ransmits the operation and timer settings to the indoor unit.
The LCD shown in the illustration below is the display immediately after the reset switch is pressed. Usually not all the data are displayed. On the LCD shown below
, the functions not available for this room air conditioner are
also displayed.
NAMES AND FUNCTIONS OF EACH P
AR
T (continued)
T
ransmission Part
HUMIDITY
Button
Press this button to set the humidity for dehumidify and dry cool operations.
Screw
INFRARED HUMAN-PRESENCE SENSING Button Press this button to enter the dynamic air deflection mode. (Page 19, 20)
Press this button to start I
on mist
operation.
– 6 –
Press this button to stop any operation except the preset timer. lit when a signal is sent.
ION MIST Button
(Page
18)
10_14SH3_OM.indd 6 10_14SH3_OM.indd 6
2012-2-21 14:51:352012-2-21 14:51:35