Hitachi RAC-10SH3, Руководство по обслуживанию

Страница: 20 / 153

4
5
6
How to cancel the preset timer
Press the
(CANCEL) button.
(All the preset timer will erase)
•
(OFF
TIMER) /
(ON
TIMER), which are to be set using the clock function,
cannot be set during the operation set by the
(AIR
during the quick laundry or condensation control mode
PURIFYING) buttons or
operation.
under
(DEHUMIDIFY)
•
As the time settings are stored in memory in the remote controller
, just press
the
(PRESET) button in order to use the same settings next time.
Press the
(ON
TIMER) button.
•
(ON
TIMER) blinks.
•
6:00 a.m. or the previous preset time is displayed.
•
display indicates the
sequence of
(OFF
TIMER)
and
(ON
TIMER) function.
Press the
(TIMER)
button to set the time.
•
T
ime can be set in increments
of 10 minutes.
•
The time can be fast-forwarded by continuously pressing the button.
T
ime is incremented
T
ime is decremented
Press the
(PRESET)
button.
•
A
short beep sounds and the
(ON
TIMER) is set.
•
(ON
TIMER) indication stops
blinking and lights up.
(TIMER SET) will be
displayed.
•
The
(TIMER) indicator on the
indoor unit lights up.
•
T
o change the preset time
for
(ON
TIMER), return to
procedure
and press the
(ON TIMER)
button.
ENGLISH
DEUTSCH FRANÇAIS ITALIANO SPANISH PORTUGUÊS
∂ÏÏËÓÈο РУССКИЙ
DEUTSCH FRANÇAIS ITALIANO SPANISH PORTUGUÊS
∂ÏÏËÓÈο РУССКИЙ
– 27 –
ENGLISH
10_14SH3_OM.indd 27 10_14SH3_OM.indd 27
2012-2-21 14:51:492012-2-21 14:51:49
1
2
FUR
THER CONVENIENT TIMER FUNCTION
Dehumidifying (Condensation control) operation and
(ON
TIMER) for heating operation can be set at the
same time. Dehumidifying (Condensation control) operation controls the condensation which may occur in the morning while
(ON
TIMER) for heating operation warms up the room by the time you wake up.
Combination of
(ON TIMER) and
(DEHUMIDIFY) button
•
Dehumidifying (Condensation control) operation and
(ON
TIMER) for heating operation for the next morning
can be set in combination before you go to sleep.
„
The display below is shown in the case where
(ON TIMER) is set for heating operation and then
dehumidifying operation (Condensation control) is executed at 1
1:38 p.m.
Preset the
(ON
TIMER).
•
When
(ON
TIMER) is set, the air conditioner starts
operation so that the preset room temperature is almost reached at the ON
TIMER time. Check the
settings of the air conditioners when you set the timer
.
(Page 26, 27)
Press the
(DEHUMIDIFY) button.
(
symbol is displayed)
•
The dehumidifying (Condensation control) operation stops at 1:38 a.m, two hours after the start of the dehumidifying operation, and the heating operation starts in order to reach the preset temperature by 6:00 a.m.
– 28 –
10_14SH3_OM.indd 28 10_14SH3_OM.indd 28
2012-2-21 14:51:492012-2-21 14:51:49