Hitachi PXR-D, Инструкция по эксплуатации

Страница: 207 / 319

6-24 ● Transmission Sequences
Transmit the line count consecutively to items 7 and 8. If you transmit the line
count to only one of them, a communication error occurs.
(4) If you do not specify the item number, the setup data applies to all
print items.
NOTE: When transmitting print format and print specification data
consecutively in a single chain, ensure that the print format data
precedes the print specifications data.
If this order is reversed, a communication error occurs.
6.4.4-2 Text setup rules
(1) Print format
a
）
Line count
¡
When you change the line count for a print item in a certain column, you must
also set the line count for the other print items that belong to the same column.
(Example)
Setting items 7 and 8 to
one line
1 3 5 7
2 4 6 8
1 3 5
2 4 6 7 8
¡
When you change the line count for a print item, you must also set the line
count for the other print items that belong to the same column as the former one.
(Example)
Setting items 7 and 8
to two lines
1 3 5 7
2 4 6 8
1 3 5
2 4 6 7 8
Transmit the line count consecutively to items 7 and 8. If you transmit the line
count to only one of them, a communication error occurs.
¡
Increased width
¡
Two or more print format items can be consecutively transmitted in a single chain.
ESC Header 28H Increased
width
Increased width （ 1to 9 ）
¡
Code set (Code128)
ESC Header 3FH code set
0: code set B; 1: code set C
¡
Bar code "used"
→
"not used"
ESC Header 29H 30H
Use (0: not used; 1: used)
¡
Bar code "not used" → "used"
¡
Prefix code (EAN-13)
Bar code type （ 0 to 6 ）
ESC Header 29H 31H ESC Header 2AH Type
Use (0: not used; 1: used)
ESC Header 2CH
Tens Unit
position position
Prefix code
（
00 to 99
）