Hitachi PC-ARF1 Скачать руководство пользователя

Страница: 9 / 48

P5417005

ATTENTION

The recommended temperature set-point is as

follows:

* Cooling Operation: 27 to 29°C

* Heating Operation: 18 to 20°C

* Dry Operation:

23 to 25°C

<Function>

* Cooling Operation (COOL):

To decrease the room temperature.

* Heating Operation (HEAT):

To increase the room temperature.

* Dry Operation (DRY):

To decrease the humidity in the room.

* Cooling/Heating Automatic Operation (AUTO):

To cool and heat automatic changeover.

* Air Flow Operation (FAN):

To circulate the air in the room.

<Before Operation>

Apply power to the outdoor unit(s) at least

12 hours prior to operation of the system for

preheating of the compressor oil.

Do NOT turn OFF the power supply during

change of seasons.

Make sure that the outdoor unit is not covered

with snow or ice. If covered, remove it by using

warm water less than 50

If the water temperature is higher than 50°C, it

will cause damage to plastic parts.

3. Operation Method

3.1 Basic Procedures

(1) Function Selection

By pressing “

”or “ ”, the icon “ ” will

move to the next function in order of the

functions “MODE”, “SPEED”, “LOUV.” and

“TEMP”.

(2) Change of Settings

With the function (“MODE”, “SPEED”, “LOUV.”

or “TEMP”) selected, press “ ” or “ ”.

The setting will be changed.

3.2 Operation Mode

(Cooling, Heating, Dry, Cooling/Heating

Automatic and Air Flow Operation)

(1) Turn ON the power supply.

(2) Press “ ” or “ ” and select “MODE”.

(3) By pressing “ ” or “ ”,

the operation mode will be changed as

follows.

NOTE:

The advanced setting is required for the “AUTO”

operation. Contact your distributor for detailed

information.

Connecting

FAN

(AUTO)

DRY

HEAT

COOL

Back/Help

Содержание PC-ARF1

















































Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды

Hitachi PC-ARF1, Руководство по эксплуатации

Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды