Hitachi PC-ARF1 Скачать руководство пользователя

Страница: 38 / 48

P5417005

(4) Press “ ” or “ ” and select setting data.

• If “Temperature Unit” is selected

it will change as follows :

“Degrees C” ↔ “Degrees F”.

• If “Temperature Width” is selected

it will change as follows :

“0.5ºC” ↔ “1ºC”

Press “OK” when all settings are

complete.

When the selected language is English,

Fahrenheit temperature degrees can be

selected.

(5) The setting confirmation screen will display.

Select “Yes” using “ ” or “ ” and press “OK”

to confirm the setting.

The screen will return to the normal mode.

8.17.4 Main/Sub Remote Controller

(1) Select “Screen Display Setting” from the

“Menu” and press “OK”.

This function is used to select Display/Non-display

for “MAIN” or “SUB” displayed on the normal

mode screen.

(2) The “Screen Display Setting” screen will

display. Select “Main/Sub Display” using “ ”

or “

” and press “OK”.

It cannot be set if only the main controller is

available or when the display for “Main/Sub-

Remote” in the “Current Setting” is shown as

“−−”.

NOTE:

If the unit is set as “Non-display”, it is possible to

verify if the controller is Main/Sub in the “Main/

Sub-Remote” of the “Help Menu” “Current

Setting”.

(3) The “Main/Sub Display” screen displays.

By pressing “

” or “ ” the setting will

changed as follows :

“Display” ↔ “Non-display”

Select the setting and press “OK”.

Screen Display Setting

Room Name Registration

Function 19

Daylight Saving Time

Adjusting Date/Time

15:10(Fri)

Entr

Rtrn

Sel.

Back

Screen Display Setting

Main/Sub Display

Temperature Unit

Language Setting

Display Adjustment

Entr

Rtrn

Sel.

Back

Back/Help

Содержание PC-ARF1

















































Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды

Hitachi PC-ARF1, Руководство по эксплуатации

Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды