Hitachi PC-ARF1 Скачать руководство пользователя

Страница: 31 / 48

P5417005

(3) Select the indoor unit to change the louver

direction by pressing “

”, “ ”, “ ” or “ ”.

Press “OK”.

(4) Press “ ” or “ ” and select the louver from

1 to 4. The selected louver is opened and

the other louvers are closed.

(5) Select the louver angle by pressing “ ” or

“

” and press “OK”.

(6) The confirmation screen will be displayed.

Select “Yes” by pressing “ ” or “ ” and

press “OK”. The setting is confirmed and the

screen will return to the normal mode.

(7) Ensure that “INDV” is turned on at the air

flow section on the normal mode.

Back

Individual Louver Setting

01-01
01-02

01-03

Select unit to set.

01-04

Entr

Rtrn

Sel.

Back

Individual Louver Setting:01-03

Adjust air direction & louver angle.

Entr

Rtrn

Sel.

Adj.

Back

Individual Louver Setting:01-03

Adjust air direction & louver angle.

Entr

Rtrn

Sel.

Adj.

Back

Individual Louver Setting:01-03

Yes

Sel.

Entr

Rtrn

Fix individual louver setting?

NOTE:

The louver direction without “INDV” will comply

with the setting of the normal mode.

INDV

NOTE:

The indoor unit displayed on the screen flashes

if an individual louver is set.

The louver angle will be changed as follows.

8.11 Individual Louver Setting

8.11.1 Setting

This setting is available only for indoor units that

allow an individual louver control. Each louver

angle can be set individually.

NOTE:
• This function is available only when the indoor

unit corresponds to an individual louver.

• This function cannot be set if the unit is stopped.

• The fan speed will be changed to “LOW” while

this function is being set. (After the setting is

completed, the unit operation will be back to

normal.)

• As for “Start-up of Heating Operation”, “During

Defrost Operation” and “Activation of Thermo-

Controller”, all the louver angles will be secured

horizontally automatically when this function is

activated.

• This function will not be available if two

controllers (including a combination of wired

cont wireless controller) are used.

(1) Select “Individual Louver Setting” from the

“Menu” and press “OK”.

The “Individual Louver Setting” menu will be

displayed.

(2) Select “Individual Louver Setting” from the

“Individual Louver Setting” menu and press

“OK”.

Function 15

Total Heat Exchanger SET

VENTI

Louver Open/Close

Individual Louver Setting

15:10(Fri)

Entr

Rtrn

Sel.

Back

Cancel INDV Louver SET

Individual Louver Setting

Entr

Rtrn

Sel.

NOTE:

If there is one indoor unit connected with

the controller, four individual louvers will be

displayed.

Back/Help

Содержание PC-ARF1

















































Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды

Hitachi PC-ARF1, Руководство по эксплуатации

Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды