Hitachi PC-ARF1 Скачать руководство пользователя

Страница: 34 / 48

P5417005

8.15 Adjusting Date/Time

• This function is used to adjust the date and time.

• Periodic time setting is recommended.

(Clock accuracy: difference

70 seconds by a

month)

• With this controller, the installed electric battery

will allow continued operation for 72 hours.

Reset the date and time if the controller remains

without power for longer than 72 hours or the

main power supply is OFF for a long period of

time.

• When adjusting time from the main controller, the

sub controller of the same refrigerant cycle will

be set at the same time.

NOTE:

It is possible to adjust time from the sub

controller. If more than two minutes’ modification

is done, the main controller will be set at the

same time. (Check Main or Sub at the “Main/

Sub-Remote” from the “Help Menu” “Current

Setting”).

(1) Select “Adjusting Date/Time” from the “Menu”

and press “OK”.

(2) Press “ ” or “ ” and select “yyyy/mm/dd/

hh/mm”.

Set date/time?

Adjusting Date/Time

Yes

Sel.

Entr

Rtrn

Back

(5) The confirmation screen is displayed. Select

“Yes” by pressing “ ” or “ ” and press “OK”.

The setting will be confirmed and the screen

will return to the normal mode.

Screen Display Setting

Room Name Registration

Function 19

Daylight Saving Time

Adjusting Date/Time

15:10(Fri)

Entr

Rtrn

Sel.

Back

Back/Help

2015

01 01

00 : 19

yyyy mm dd

hh mm

Adjusting Date/Time

Adj.

Sel.

Entr

Rtrn

Back

Back/Help

(3) Press “ ” or “ ” to change the setting.

Press or keep pressing “ ” or “ ” to adjust

numbers.

(4) After the setting is completed, press “OK”.

Содержание PC-ARF1

















































Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды

Hitachi PC-ARF1, Руководство по эксплуатации

Результаты поиска

Содержание PC-ARF1

Отзывы:

Похожие инструкции для PC-ARF1

Бренды по названию

Популярные бренды