manualshive.com logo in svg

Hitachi L100DN DeviceNet Series Addendum, Руководство "Прочтите сначала это"

Поделиться
Скачать
Hitachi L100DN DeviceNet Series Addendum Скачать руководство пользователя страница 26

Configuring Drive Parameters

26

Configuring Drive Parameters

This section provides details for L100DN DeviceNet Series configuration corresponding 
to Chapter 3, “Configuring Drive Parameters,” in the L100 Inverter Instruction Manual.

Hitachi L100DN DeviceNet Series inverters have additional parameters and functions 
beyond the L100 standard set. Also, several parameters that are not needed for a 
network-controlled inverter have been removed.

New parameters for L100DN DeviceNet Series

• P_41 to P_49 – DeviceNet network settings

Removed parameters 

(present only in standard L100)

• D_04 – Process variable (PV) monitor for PID control

• A_01 – Frequency source selection

• A_11 to A_16, B_81, C_81, C_82 – Analog input settings

• B_89 – Data select for digital operator OPE-J

• A_71 to A_76, C_44 – PID control settings

• C_04, C_05, C_06, C_14, C_15, C_16 – Intelligent output terminal settings for

[4] to [6]

• C_23 – FM signal selection

• C_33 – Intelligent output terminal settings for [AL0] to [AL2]

New intelligent input terminal functions 

(not present in standard L100)

• [STA] – Start Motor (option code 20)

• [STP] – Stop Motor (option code 21)

• [F/R] – Forward/Reverse (option code 22)

• [DNT] – Select DeviceNet (option code 25)

• [UP] – Remote control Up function (option code 27)

• [DWN] – Remote control Down function (option code 28)

• [OPE] – Force Operation from Digital Operator (option code 31)

Removed intelligent input terminal functions

 (present in standard L100)

• [AT] – Analog Input Voltage/current Select (option code 16)

Removed intelligent output terminal functions

 (present in standard L100)

• [OD] – Output Deviation for PID Control

The tables in this section list only the new parameters and intelligent inputs for the 
L100DN DeviceNet Series inverters. Refer to Chapter 3 in your L100 instruction manual 
for the main set of inverter parameters and intelligent terminal functions.

Содержание L100DN DeviceNet Series Addendum

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды