Hitachi HF-W2000 50 Скачать руководство пользователя страница 196

Страница: 196 / 290

8. MAINTENANCE OPERATIONS

8-13

8.4.1 Log information collection command (logsave)

Name

logsave

- Collects log information

Syntax

logsave

[

-e

file-name][directory]

Functionality

The

logsave

command saves data used for preventive maintenance and post-failure analysis of problems. The

data is compressed and recorded as a single file with the file name

logsave.zip

The following options are available for this command. If no option is specified, the

logsave

directory is created

directly under the system drive (usually

C:\

), and data is saved in that directory.

-e

file-name: Data previously saved by the

logsave

command will be decompressed. For the file name, specify

the absolute path of the file that you want to decompress. If you do not use this option, the

logsave

command will save the data.

directory: When you are not using the

-e

option, specify the directory in which you want to store the saved data. If

this option is not used the

logsave

directory is created directly under the system drive (usually

C:\

and data is saved in that directory.

When you are using the

-e

option, specify the directory where you want to store the decompressed data.

If you do not use this option, the data is decompressed in the current directory.

Table 8-4 shows the information collected by the

logsave

command.

Table 8-4 Information saved by the

logsave

command

Item

Description

Windows

event log file

Backup of the event log file

RAS software log data

RAS software operation log

RAS software user settings information

User settings definition file for pop-up notifications

Windows

version information

Version information for Windows

system files and driver files

Minimum memory dump

Files in the directory used for storing a minimum memory dump

System information

System information that includes hardware resources and the software
environment

Output of the RAS information display
command

Status of the equipment, such as the status of the fan and the temperature
inside the chassis, as well as configuration information about the RAS
software

Output of the

ipconfig

command

Network that sets information

RAID log data

RAID operational logs (for the B model only)

Windows

setup log

Log files from Windows

setup

Содержание HF-W2000 50



































































































































































































































































































Результаты поиска

Содержание HF-W2000 50

Отзывы:

Похожие инструкции для HF-W2000 50

Бренды по названию

Популярные бренды

Hitachi HF-W2000 50, Инструкция по эксплуатации

Результаты поиска

Содержание HF-W2000 50

Отзывы:

Похожие инструкции для HF-W2000 50

Бренды по названию

Популярные бренды