Hitachi HF-W2000 50 Скачать руководство пользователя страница 182

Страница: 182 / 290

7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD

7-11

7.3.2 Errors generated during the recovery process and corrective actions

When an error occurs during the recovery process, record the error message and the error code displayed in the

window, and take action as shown in the following table. If you take action accordingly but are still unable to

proceed with the recovery process, or if the no. 8 error message appears, contact our sales representative.

Table 7-1 Error messages generated during the recovery process

No.

Error message

Action

Retry time out. Please refer to the
INSTRUCTION MANUAL.

• Check the integrity of the system drive, such as by

performing read and write tests.

Image file is not found. Please
refer to the INSTRUCTION MANUAL.

• Retry the recovery process.
• Check the integrity of the recovery DVD, such as by

performing read tests.

• Verify that the DVD drive works properly, such as by

performing read tests.

Drive failed or not connected.
Please refer to the INSTRUCTION
MANUAL.

• Verify that the system drive is connected correctly.
• Check the integrity of the system drive, such as by

performing read and write tests.

Failed to access the drive. Please
refer to the INSTRUCTION MANUAL.

Failed to assign drive letter.
Please refer to the INSTRUCTION
MANUAL.

• Verify that no devices that are not required for the

recovery process are connected. If any such devices
are connected, disconnect them.

Failed to read from Product Recovery
DVD. Please refer to the INSTRUCTION
MANUAL.

• Verify that the DVD drive is connected correctly.
• Check the integrity of the recovery DVD, such as by

performing read tests.

• Verify that the DVD drive works properly, such as by

performing read tests.

Recovery failed. Please refer to the
INSTRUCTION MANUAL.

• Retry the recovery process.

Recovery invalid. Please refer to
the INSTRUCTION MANUAL.

• Contact one of our sales representatives.

Drive capacity is not enough. Please
refer to the INSTRUCTION MANUAL.

• Check the size of the system drive.

The capcity of drive is not equal.

• Install drives with equivalent capacities.

Содержание HF-W2000 50



































































































































































































































































































Результаты поиска

Содержание HF-W2000 50

Отзывы:

Похожие инструкции для HF-W2000 50

Бренды по названию

Популярные бренды

Hitachi HF-W2000 50, Инструкция по эксплуатации

Результаты поиска

Содержание HF-W2000 50

Отзывы:

Похожие инструкции для HF-W2000 50

Бренды по названию

Популярные бренды